#12137
Hello all,

Rookie here - I'm hoping to re-upholster this Stokke Variable Wing Balans kneeling stool.

I originally intended to use 2-inch high-density foam, however, I've noticed that the existing padding wraps around the front and rear lips of the stool (due to the kneeled seating position).

What material/technique would you recommend for the padding? Should I be going for a thinner foam that can be wrapped around the lips to the underside of the stool, or something else altogether?

Many thanks.
Attachments
20210113_115204.jpg
20210113_115204.jpg (1.69 MiB) Viewed 2288 times
20210113_115228.jpg
20210113_115228.jpg (1.21 MiB) Viewed 2288 times
20210113_115236.jpg
20210113_115236.jpg (1.11 MiB) Viewed 2288 times
#12139
2 possibilities I see.

1 is 2x 1" layer of foam with the top layer larger than the bottom wrapping around over the 1st.

2nd is a 2" pool noodle foam with a cut channel in the middle that would slide over the ends giving you a perfect wrap around shape. Google cylindrical foam. Please note, I'm a novice, just looking at the shape. I'm sure the pros on here would have better ideas. Just my 2.5 cents.
Single Faced Basting Tape

Drop the single face and just enter basting tape. […]

I have a Pfaff 545 and 1245 which use the same bob[…]

Do you have a picture of the corner? Trying to und[…]

The Padded Cell

nice job! :grin: