- Thu Mar 23, 2023 12:09 am
#16190
I have two old sunvisors to recover. They have the material sewn on the bottom (the long side opposite the bar side) and a 4 fold wrap for a finished edge. The folded edge started off about 3/4" and was then folded in quarters and sewn over the raw edge. First how can you sew such a narrow piece on a edge like this, second how can the vinyl be folded accurately this small?
I know that the old, pre-72, vinyl was a lot thinner than what can be obtained today so that's part of the issue.
The customer wants them to look like the original. He didn't ask how much, just how long it will take.
Any ideas or things others have learned trying this technique would be appreciated.
Thanks,
Ron
I know that the old, pre-72, vinyl was a lot thinner than what can be obtained today so that's part of the issue.
The customer wants them to look like the original. He didn't ask how much, just how long it will take.
Any ideas or things others have learned trying this technique would be appreciated.
Thanks,
Ron