Connect with your social network account

[Blucher]

Hey, all,

I need to reupholster my office chair. After almost 20 years, the foam is shot. I suspect I'll need some pretty high-density foam for this, since the foam layer is pretty thin, and the chair takes a lot of abuse.

Does anyone have a good source for foam for this? Thank you in advance.

[BigRig]

@Blucher,

I would steam the life out of your existing foam and see if you can bring some life back into it. Are you here in the US?

[Blucher]

BigRig, thanks for your reply. Never heard of steaming foam, but I'm new to all of this, and I'll google it. I'm in Virginia.

I am going to need some high-density (or higher-ILD) foam for a bench seat in my boat, though. I had a local fellow re-upholster it a few years back, and he replaced the original foam with much lower-density foam and now it beats you to death underway unless you sit on a throwable cushion.

Are there any good sources out there with decent prices? The prices and specs I find online seem to be all over the map. A lot of them don't spec the ILD figure or even the lb/cu ft number...very confusing.

Thanks again.

[BigRig]

@Blucher,

You have already done some foam research. Save a lot of hassle and just order from Albright ask for the high density blue foam and you will have that bench seat covered. A 3" thickness is more than comfortable.

[Blucher]

Thank you sir!

[BigRig]

@Blucher ,

You got it!

[Mikesimpson]

I re did this office chair a couple of years ago for my Dad. The padding that was in it originally was just the crappy Polly stuffing and it had definitely seen better days. I replaced it all with 1” high density foam and then another 1” of foam in the areas that you see the tan vinyl. Gives it a little more bolstered look. I used 2.5 density 50 ILD foam. DLT supply or Albrights are good places to get it. The foam is a little stiff at first but breaks in to be very comfortable. Depending on how much foam you are going to be buying, I use a place out of Indiana called US Foam. They have very good prices on slab foam and if you order $100 worth it ships free.

[Blucher]

Thank you Mikesimpson, that's just the kind of info I was after.

[John]

Great info @Mikesimpson Ill have to check out that US Foam place next time I order foam.

[Mikesimpson]

https://usfoamcorporation.com/upholstery-foam this is where I have been getting my slab foam. They are basically a foam distributor. The web site sucks and you either have to call or email them to order. But the foam is nice. After looking at the site again I realized that I'm using the 2.2 density foam in a 50 pound compression for bottom cushions and a 35 pound for backrests. They sent me some of their 2.7 density by mistake, and even though it is a greater density I found it to compress much easier than the 2.2 density. After some phone calls back and fourth I found out the 2.7 is better "quality", but the materials the two different density's are made from are not the same and it makes them feel quite a bit different. The 2.7 would bottom out when I sat in it and the 2.2 didn't. Both where 50 compression. So long story short I prefer the 2.2 density for automotive seating where firmness is desired. The company will send you a sample pack of all of their upholstery foam upon request.

[BigRig]

@Mikesimpson ,

That is really informative and when you buy a slab what dimension are you buying in the 2.2 density foam 50 and 35 pound compression? I am want to price compare from what I am getting.

[Mikesimpson]

@BigRig I have been buying them in 24"x80"x6". They sell them in longer and wider sections also, and thickness from 1/2"-6". If you shoot them and email they will send you a price list for everything they sell. I haven't found anyone that beats them yet.

[BigRig]

@Mikesimpson , thank you I will look!

[campinggoal]

I will suggest you buy office chair straight from amazon. Most of the office chairs cause back pain. To avoid this you must look for a office chair which is best to avoid back pain and buttock pain. In my opinion hbada is a good chair both in terms of budget and money.

[johnsmith122]

Hi Blucher,

Are you currently in Virginia? Check out this site.com. They are in the foam business and recommend recliners in Virginia. I recommend asking for 2.6 density of foam from them. I tried using 2.2 density foam, but it quickly shredded. They can send you samples and guide you if you contact them on their contact page. Make sure that the foam can withstand compression and weight.

[cosmichomscanada]

With a vision to empower and inspire our customers to achieve their financial goals by transforming their living places with furniture near me cheap and home essentials. With an unwavering commitment to product excellence, affordable pricing and unparalleled customer service, we have served our valued clientele for over a decade. Our mission is simple: to provide consumers with a wide selection of furniture with storage for small spaces and home products that suit their unique tastes and preferences. We understand the importance of finding the perfect pieces to create a truly harmonious and comfortable environment, which is why we carefully curate our collections to suit different styles and requirements. Over the years, Cosmic Homes Canada has become synonymous with reliability and trust, you can furniture for small spaces with confidence, as we are emerging as a leading retailer in the furniture industry throughout North America and Europe. Our success can be attributed to staying ahead of market trends, adapting to evolving customer needs, and consistently delivering high-quality products.

[Ron Henningsen]

Why all the advertising and marketing info on posts when someone asks a simple question about foam. This has been happening on several different posts over the past few weeks. We really don't need to hear about back pain from finished furniture when someone just need to know where to purchase high density foam.

[Pollyyyy]

Did you find a solution to the problem? Whenever I have difficulties with furniture, I look for other options for replacement and contact cabinet now customer service. There you can read reviews about a certain piece of furniture, and replace it with a suitable one, which, in my opinion, would be the best solution.

[Rhonda]

Good information. I'm going to check this foam place as well. Thanks